Power Door Lock Switch: Service and Repair

POWER DOOR LOCK SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. The driver side power door lock switch is part of the power accessory switch panel. To replace, refer to Power Accessory Switch Panel Replacement. Power Accessory Switch Panel Replacement
2. If removing the passenger side power lock switch, use a taped flat bladed tool, gently pry the front side door accessory switch mounting plate (2) from the front side door trim (1).




3. Disconnect the front side door lock switch electrical connector (3).




4. Remove the front side door lock switch (1) from the mounting plate (3) by releasing the tabs (5).

INSTALLATION PROCEDURE




1. Install the front side door lock switch (1) into the mounting plate (3). Ensure that the retaining tabs (5) are completely engaged.




2. Connect the front side door lock switch electrical connector (3).




3. Install the front side door accessory switch mounting plate (1) to the front side door trim (2).