Mirror Replacement - Power

MIRROR REPLACEMENT - POWER

REMOVAL PROCEDURE




1. Unclip and remove the inner mirror garnish (6) from the door.
2. Remove the front side door trim.
3. Disconnect the front upper speaker electrical connector (5), if equipped.
4. Disconnect the outside rearview mirror electrical connector (2).
5. Remove the following components from the door:
- The 3 nuts
- The front upper speaker (3), if equipped.
- The outside rearview mirror (1)

INSTALLATION PROCEDURE




1. Install the outside rearview mirror (1) to the door and the front upper speaker (3),if equipped. Secure the mirror with the 3 nuts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the outside rearview mirror nuts to 8 N.m (6 lb ft).

2. Connect the front upper speaker electrical connector (5),if equipped.
3. Connect the outside rearview mirror electrical connector (2).
4. Install the inner mirror garnish (6) to the door.
5. Install the front side door trim panel.