Brake Caliper Bracket Replacement- Front

Brake Caliper Bracket Replacement - Front

Removal Procedure
1. Remove the disc brake hardware and pads. Refer to Disc Brake Hardware Replacement - Front.
2. Remove the 2 bolts (1).
3. Remove the bracket.

Installation Procedure

Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the bracket and the 2 bolts (1).
Tighten
Tighten the bolts to 106.8 N.m (78.77 lb ft).
2. Install the disc brake hardware and pads. Refer to Disc Brake Hardware Replacement - Front. Disc Brake Hardware Replacement - Front