Oil Pump: Service and Repair

Oil Pump Replacement
Removal Procedure
1. Remove the timing chain.





2. Remove the five oil pump bolts.
3. Remove the oil pump.
4. Remove the oil pump gasket.

Installation Procedure

Important: Engage the ridges of the oil pump drive rotor with the flat sections of the crankshaft.

1. Install the oil pump. Use a new oil pump gasket.

Notice: Refer to Fastener Notice in Service Precautions.





2. Use the five oil pump bolts in order to secure the oil pump.
^ Tighten the oil pump bolts to 11 Nm (97 inch lbs.).
3. Install the timing chain.