Accelerator Pedal: Service and Repair

ACCELERATOR CONTROLS PEDAL REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the accelerator cable from the accelerator pedal lever.
2. Remove the 2 bolts (3).
3. Remove the accelerator pedal and the pedal lever from the vehicle.
4. Remove the one retainer, the spring, the pin, and the accelerator pedal from the pedal lever.

INSTALLATION PROCEDURE




1. Connect the accelerator pedal to the pedal lever. Secure the pedal with one pin, a spring, and a retainer.
2. Connect the accelerator pedal and the pedal lever to the vehicle.
3. Secure with the 2 bolts (3).

NOTE: Refer to Fastener Notice.

Tighten the bracket bolts to 10 N.m (89 lb in).

4. Connect the accelerator cable to the accelerator pedal lever.