Fuel Pressure Regulator: Service and Repair

FUEL PRESSURE REGULATOR REPLACEMENT (AWD)

REMOVAL PROCEDURE




1. Remove the fuel sender assembly.
2. Remove the bottom cap (2) and the lower cushion (3) from the fuel sender assembly.




3. Remove the fuel pressure regulator (1) from the fuel filter assembly (2).

INSTALLATION PROCEDURE




1. Apply gasoline to a new fuel pressure regulator O-ring (1).
2. Install the new O-ring (1) onto the fuel pressure regulator (2).




3. Install the fuel pressure regulator (1) into the fuel filter assembly (2).




4. Install the fuel pressure regulator (1) into the fuel sender assembly.
5. Position the lower cushion (3) on bottom of fuel pump, and install the lower cap (2) to the sender assembly until the cap locks into place.
6. Install the fuel sender assembly to the fuel tank.