Variable Induction Control Valve: Service and Repair

CAMSHAFT POSITION (CMP) ACTUATOR SOLENOID VALVE FILTER REPLACEMENT

REMOVAL PROCEDURE




1. Remove the 2 fasteners from the engine cover.
2. Remove the 2 plastic retainers from the engine cover.
3. Remove the engine cover (1) from the engine.




4. Remove the oil filter plug (3) from the cylinder head.




5. Remove the oil filter (2) from the oil filter plug (1).

INSTALLATION PROCEDURE




1. Install the oil filter (2) into the oil filter plug (1).




2. Install the oil filter plug (3) with a new O-ring (2) into the cylinder head.
3. Tighten the oil filter plug.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the plug to 21 N.m (15 lb ft).




4. Install the engine cover (1).
5. Secure the engine cover (1) with the 2 fasteners.

Tighten the 2 fasteners to 8.8 N.m (77 lb in).

6. Install the 2 plastic retainers.