Malfunction Lamp / Indicator: Description and Operation

INFLATABLE RESTRAINT PASSENGER AIR BAG ON/OFF INDICATOR
The PASSENGER AIR BAG ON/OFF indicators located in the center of the instrument panel (I/P), is used to notify the driver and passenger when the I/P air bag is enable or disable.

AIR BAG INDICATOR
The AIR BAG indicator, located in the instrument panel cluster (IPC) is used to notify the driver of supplemental inflatable restraint (SIR) system malfunctions and to verify that the sensing and diagnostic module (SDM) is communicating with the IPC. When the ignition is turned ON, the SDM is supplied with ignition positive voltage. The SDM requests the IPC to flash the AIR BAG indicator 7 times. While flashing the indicator, the SDM conducts test on all SIR system components and circuits. If no malfunctions are detected the SDM will communicate with the IPC through the serial data circuit and command the AIR BAG indicator OFF. The SDM provides continuous monitoring of the air bag circuits by conducting a sequence of checks. If a malfunction is detected the SDM will store a DTC and command the IPC to turn the AIR BAG indicator ON via serial data. The presence of a SIR system malfunction could result in non-deployment of the air bags or deployment in conditions less severe than intended. The AIR BAG indicator will remain ON until the malfunction has been repaired.