Operation CHARM: Car repair manuals for everyone.

Left Rear



SEAT BELT RETRACTOR REPLACEMENT - LEFT REAR

REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 2 in Restraint Systems.
2. Remove the left rear seat.
3. Remove the left rear seat hinge.
4. Remove the left rear door sill trim.
5. Remove the left rear seat garnish trim.
6. Remove the rear storage compartment.
7. Remove the rear compartment access panel.
8. Remove tool storage access panel.
9. Remove tool storage tray.
10. Remove child tether upper anchor brackets.
11. Remove the left lower quarter trim panel.




12. Remove the seat belt upper anchor bolt trim cover (1).
13. Remove the seat belt upper anchor bolt (8).
14. Remove the shoulder belt guide (7).
15. Remove the seat belt lower anchor bolt (5).
16. Remove the rear seat belt retractor upper mounting bolt (3).
17. Remove the rear seat belt retractor lower mounting bolt (4).
18. Remove the rear seat belt retractor assembly (2).

INSTALLATION PROCEDURE




1. Install the rear seat belt retractor (2) to the vehicle. Secure the retractor with the upper mounting bolt (3) and the lower mounting bolt (4).
- Tighten the rear seat belt retractor upper mounting bolt to 5 N.m (44 lb in).
- Tighten the rear seat belt retractor lower mounting bolt to 41 N.m (30 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the rear seat belt lower anchor bolt (5).

Tighten the rear seat belt lower anchor bolt to 41 N.m (30 lb ft).

3. Install the shoulder belt guide (7). Secure with bolt (8).

Tighten the rear seat belt upper anchor bolt to 41 N.m (30 lb ft).

4. Install the upper anchor bolt trim cover (1).
5. Install the left lower quarter trim panel.
6. Install the child tether upper anchor brackets.
7. Install the tool storage compartment tray.
8. Install the tool storage access panel.
9. Install the rear compartment access panel.
10. Install the rear storage compartment.
11. Install the left seat garnish trim.
12. Install the left rear door sill trim.
13. Install the left rear seat hinge.
14. Install the left rear seat.
15. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 in Restraint Systems.