Front Suspension

Stabilizer Shaft Link Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front tire and wheel assembly from the vehicle.





3. Use a 6 mm wrench in order to hold the stabilizer shaft link upper stud. Remove the nut from the stud in order to separate the link (3) from the strut bracket.
4. Use a 6 mm wrench in order to hold the stabilizer shaft link lower stud. Remove the nut from the stud in order to separate the link from the stabilizer shaft.

Installation Procedure





1. Use a 6 mm wrench in order to hold the stabilizer shaft link upper stud. Install the nut and the stud to the bracket (1) on the strut.
^ Tighten the nut to 74 Nm (54.6 ft. lbs.).
2. Use a 6 mm wrench in order to hold the stabilizer shaft link lower stud. Install the nut and the stud to the stabilizer shaft.
^ Tighten the nut to 74 Nm (54.6 ft. lbs.).
3. Install the front tire and wheel assembly to the vehicle.
4. Lower the vehicle.