Rear Suspension

Wheel Bearing/Hub Replacement - Rear

Removal Procedure
1. Remove the rear knuckle.





2. Remove the dust deflector (2).





3. Remove the 4 bolts (2, 3, 4, 5).
4. Remove the wheel bearing and hub assembly.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the wheel bearing and hub assembly and the 4 bolts (2, 3, 4, 5).
^ Tighten the bolts to 56 Nm (41.3 ft. lbs.).
2. Use a hydraulic press in order to install a NEW dust deflector.
3. Install the rear knuckle.