7. First Reverse Brake Piston Removal

First Reverse Brake Piston Removal

^ Tools Required
- J 23327 Clutch Spring Compressor
- J 35683 First and Reverse Brake Piston Compressor





1. Install the J 23327 with a J 35683 and compress the 1st-reverse brake piston return spring until the 1st-reverse brake piston return spring snap ring (2) can be removed.





2. Remove the 1st-reverse brake piston return spring snap ring (1) from the transaxle case.
3. Remove the J 23327 and the J 35683 from the transaxle case.





4. Remove the 1st-reverse brake piston return spring (1) from the transaxle case.





5. Caution: Refer to Safety Glasses Caution in Service Precautions.

Important: When using compressed air to remove components, air pressure should not exceed 98 kPa (14 psi).

Remove the 1st-reverse brake piston (1) from the transaxle case by slowly applying low pressure compressed air into the fluid passage (2).
6. Remove the 1st-reverse brake assembly. Refer to First Reverse Brake Assembly Replacement.