Clutch Slave Cylinder: Service and Repair
Clutch Actuator Cylinder ReplacementRemoval Procedure
1. Remove the clutch actuator cylinder fluid line from the clutch actuator cylinder.
2. Remove the clutch actuator cylinder bolts.
3. Remove the clutch actuator cylinder from the transaxle.
Installation Procedure
1. Install the clutch actuator cylinder to the transaxle.
2. Notice: Refer to Fastener Notice in Cautions and Notices.
Install the clutch actuator cylinder bolts.
Tighten the clutch actuator cylinder bolts to 12 Nm (9 ft. lbs.).
3. Install the clutch actuator cylinder fluid line to the clutch actuator cylinder.
4. Bleed the hydraulic clutch system. Refer to Hydraulic Clutch Bleeding.