Inflatable Restraint Roof Rail Module Replacement - Right

INFLATABLE RESTRAINT ROOF RAIL MODULE REPLACEMENT - RIGHT

REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 6.

CAUTION: Refer to SIR Caution in Service Precautions.




2. Remove the headliner.
3. Remove the roof rail module electrical connector.
4. Remove the roof rail module clip (1).
5. Remove the 6 roof rail module screws (3).
6. Remove the 3 roof rail module bolts (4).
7. Remove the roof rail module (2).

INSTALLATION PROCEDURE




1. Install the roof rail module (2).
2. Install the roof rail module bolts (4) in sequence shown.

Tighten the roof rail module mounting bolts to 9.8 N.m (7 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the 6 roof rail module screws (3).
4. Install the roof rail module clip (1).
5. Install the roof rail module electrical connector.
6. Install the headliner.
7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 6.