Radio Replacement

RADIO REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the instrument panel (I/P) lower trim panel.
3. Remove the screws and the audio system.
4. Disconnect the audio system electrical connector and the antenna cable.

INSTALLATION PROCEDURE




1. Connect the audio system electrical connector and the antenna cable.
2. Install the audio system with the screws.

Tighten the audio system screws to 6 N.m (53 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the I/P lower trim panel.
4. Connect the negative battery cable.
5. Enter the audio security system 4-digit code. Refer to Radio/Audio System Description and Operation