Removal and Replacement

Console Replacement - Front Floor

Removal Procedure






Notice: Fastener Notice in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the gearshift lever boot.




3. Remove the screws from the floor console.
4. Disconnect the electrical connector.
5. Remove the floor console.



Installation Procedure





1. Connect the electrical connector.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the floor console with the screws.

Tighten the floor console screws to 4 N.m (35 lb in).

3. Install the gearshift lever boot.
4. Connect the negative battery cable.