Lock Replacement - Front Door

Lock Replacement - Front Door

Removal Procedure





Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the seal trim. Refer to Water Deflector Replacement - Door (Service and Repair) .
3. Disconnect the inside door handle and the lock rods.




4. Disconnect the outside door handle and the lock rods.




5. Remove the bolts and the guide rail.
6. Remove the screws and the front door lock.
7. Disconnect the electrical connector.



Installation Procedure





1. Connect the electrical connector.
2. Connect the inside door handle and the lock rods.
3. Connect the outside door handle and the lock rods.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the front door lock with the screws.

Tighten the front door lock screws to 8 N.m (71 lb in).

5. Install the guide rail with the bolts.

Tighten the guide rail bolts to 7 N.m (62 lb in).

6. Install the seal trim. Refer to Water Deflector Replacement - Door (Service and Repair) .
7. Connect the negative battery cable.