Procedures

SUNROOF MODULE ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the headliner.
3. Remove the drain hoses.
4. Remove the strap.
5. Disconnect the electrical connector.
6. Remove the bolts and the motor.




7. Disconnect the electrical connector.
8. Remove the strap.
9. Remove the motor control module.




10. Remove the bolts and the sunroof housing from the vehicle.




11. Remove the drain channel.
12. Remove the sunshade.

INSTALLATION PROCEDURE




1. Install the sunshade.




2. Install the sunroof housing.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the sunroof housing bolts to 7 N.m (62 lb in).




3. Install the motor control module.




4. Install the motor.

Tighten the sunroof motor screws to 5 N.m (44 lb in).

5. Install the drain hoses.
6. Install the headliner.
7. Connect the negative battery cable.