Seat Back Replacement - Rear

SEAT BACK REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Remove the rear cushion.
2. Remove the bolts that seat back.
3. Remove the rear seat back by pulling the base of the seat back out and sliding the seat back up.

INSTALLATION PROCEDURE




1. Insert the rear seat back by inserting the metal loops over the hooks.




2. Install the rear seat back with the bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the rear seat back bolt to 25 N.m (18 lb ft).

3. Install the rear seat cushion.