Seat Replacement - Front Bucket

Seat Replacement - Front Bucket

Removal Procedure





1. Remove the bolts that secure the rear portion of the seat to the floor.
2. Remove the bolts that secure the front portion of the front seat to the floor.
3. Disconnect the electrical connector from the driver's seat.
4. Remove the seat.



Installation Procedure





1. Connect the electrical connector to the driver's seat.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts into the front and rear portion of the front seat.

Tighten the front and rear bucket seat bolts to 25 N.m (18 lb ft).