Scan Tool Data Definitions

Scan Tool Data Definitions
The Data Display function contains lists of ABS and TCS data parameters. A brief description of all ABS and TCS data parameters available on the scan tool are listed below. The list is arranged in alphabetical order.

ABS Warning Indicator
The scan tool will display On or Off depending on the state of the ABS indicator.

Battery Voltage Signal
The scan tool displays 0 to 30 Volts. The voltage measured between the module's battery positive voltage circuit and ground circuit.

Brake Switch
The scan tool displays Applied or Released. The scan tool displays the state of the brake switch.

DRP Disabled
The scan tool will display Yes or No. This will indicate if the DRP has been disabled.

LF Wheel Speed Sensor
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the left front wheel.

LR Wheel Speed Sensor
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the left rear wheel.

LF Inlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the commanded state of the LF inlet solenoid.

LF Outlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the commanded state of the LF outlet solenoid.

LR Inlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the commanded state of the LR inlet solenoid.

LR Outlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the actual state of the LR outlet solenoid.

Pump Motor Command
The scan tool displays On or Off. The scan tool displays the commanded state of the pump motor.

Pump Motor Relay Command
The scan tool displays On or Off. The scan tool displays the commanded state of the pump motor relay.

RF Wheel Speed Sensor
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the right front wheel.

RR Wheel Speed Sensor
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the right rear wheel.

RF Inlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the commanded state of the RF inlet solenoid.

RF Outlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the commanded state of the RF outlet solenoid.

RR Inlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the commanded state of the RR inlet solenoid.

RR Outlet Solenoid Command
The scan tool displays On or Off. The scan tool displays the commanded state of the RR outlet solenoid.

Solenoid Relay Command
The scan tool displays On or Off. The scan tool displays the commanded state of the solenoid relay.