Turn Signal Lamp Replacement (Notchback)

TURN SIGNAL LAMP REPLACEMENT (NOTCHBACK)

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the headlamp.
3. Remove the screws and the turn signal lamp assembly.
4. Disconnect the electrical connector.
5. Remove the bulb.

INSTALLATION PROCEDURE




1. Install the bulb.
2. Connect the electrical connector.
3. Install the turn signal lamp assembly with the screws.
4. Install the headlamp.
5. Connect the negative battery cable.