Inflatable Restraint Side Impact Sensor Replacement (North America)

INFLATABLE RESTRAINT SIDE IMPACT SENSOR REPLACEMENT (NORTH AMERICA)

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION:
- Refer to SDM Voltage After Ignition Is Turned OFF Caution.
- Refer to Battery Disconnect Caution.

2. Remove the trim from the center pillar.
3. Remove the side air bag sensor mounting bolts.
4. Remove the side air bag sensor.

INSTALLATION PROCEDURE




1. Install the side air bag sensor.
2. Install the side air bag sensor mounting bolts.

Tighten the side air bag sensor mounting bolts to 8 N.m (71 lb in).

NOTE: Refer to Fastener Notice.

3. Install the trim to the center pillar.
4. Connect the negative battery cable.