Front Suspension

Wheel Hub, Bearing, Knuckle, and Seal Replacement

^ Tools Required
- 500-20 Hex Nut
- J 36661-2 Forcing Screw
- J 37105-1 Support Bridge
- J 37105-2 Bearing Adapter
- J 37105-3 Hub Adapter

Disassembly Procedure





1. Remove the drive axle from the front wheel hub.
2. Remove the inner snap ring.





3. Remove the wheel hub with the J 37105-1 , the J 37105-3 , the 500-20 , and the J 37105-2 .





4. Remove the disc brake splash.
5. Remove the outer snap ring.





6. Remove the wheel bearing with the J 37105-1 , the J 37105-2 , the 500-20 , and the J 36661-2 .
7. Clean the bore of the knuckle.

Assembly Procedure





1. Install the outer snap ring and push the wheel bearing into place with the J 37105-1 , the J 37105-2 , the 500-20 , and the J 36661-2 .





2. Install the disc brake splash.
3. Install the inner snap ring and push the wheel hub into place with the J 37105-3 , the J 37105-2 , the 500-20 , and the J 36661-2 .
4. Install the drive axle into the front wheel hub.