Windshield Washer Hose: Service and Repair

HOSE REPLACEMENT - WINDSHIELD WASHER

REMOVAL PROCEDURE




1. Open the hood.
2. Disconnect the windshield washer hose from the washer nozzles on the hood.
3. Remove the front left wheel.
4. Remove the screws and the front wheel well splash shield.
5. Disconnect the washer hose from the washer reservoir.

INSTALLATION PROCEDURE




1. Connect the washer hose to the washer reservoir.
2. Install the front wheel well splash shield with the screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the front wheel well splash shield screws to 1.5 N.m (13 lb in).

3. Install the front left wheel.
4. Connect the windshield washer hose to the washer nozzles on the hood.
5. Close the hood.