Wiper Motor Replacement - Rear

WIPER MOTOR REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the rear window wiper arm.
3. Remove the hatchback door lower garnish molding.
4. Remove the bolts and the rear wiper motor.
5. Disconnect the electrical connector.

INSTALLATION PROCEDURE




1. Connect the electrical connector.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the rear wiper motor with the bolts.

Tighten the wiper motor bolts to 9 N.m (80 lb in).

3. Install the hatchback door lower garnish molding.
4. Install the rear window wiper arm.
5. Connect the negative battery cable.