Symptom 4B
DTC C0460 (Symptom 4B)
Circuit Description
After replacing the power steering control module (PSCM), the steering wheel position sensors center position must be calibrated.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC C0460 Steering Position Sensor
This vehicle has DTCs which include DTC symptoms. For more information on DTC symptoms, refer to DTC Symptom Description.
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
The PSCM has not undergone the steering position sensor calibration procedure.
Action Taken When the DTC Sets
^ DTC C0460 4B is stored in memory.
^ The driver information center (DIC) displays the POWER STEERING warning message.
^ Steering assist is reduced.
^ Poor return to center
Conditions for Clearing the DTC
^ A current DTC will clear after the sensor calibration procedure has been performed.
^ A history DTC will clear after 100 consecutive ignition cycles from when the sensor calibration procedure has been performed.
Diagnostic Aids
DTC C0460 4B will set on the first ignition ON cycle after PSCM replacement.
