Seat Adjuster Motor Replacement - Horizontal

SEAT ADJUSTER MOTOR REPLACEMENT - HORIZONTAL

REMOVAL PROCEDURE

1. CAUTION: Refer to SIR Caution.

Remove the front seat.




2. Remove the seat adjuster motor cables by pulling the cables out of the adjuster.




3. Disconnect the electrical connectors.




4. Remove the fasteners from the seat adjuster motor.
5. Remove the seat adjuster motor.

INSTALLATION PROCEDURE

1. NOTE: Refer to Fastener Notice.




Install the seat adjuster motor.

Tighten the fastener to 3 N.m (26.5 lb in).




2. Connect the electrical connectors.




3. Install the seat adjuster motor cables by pushing the cables into the adjuster.
4. Install the front seat.
5. Verify that both tracks operate correctly.