Coolant Heater Cord Replacement (LZ9)

Coolant Heater Cord Replacement (LZ9)

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Disconnect the engine coolant heater cord from the engine coolant heater.




3. If equipped with the manual transmission, remove the coolant heater cord clips from the transmission range selector lever cable bracket.




4. If equipped with the automatic transmission, remove the coolant heater cord clips from the transmission range selector lever cable bracket.
5. Lower the vehicle.




6. Remove the coolant heater cord from between the shock tower and side rail.

Installation Procedure




1. Install the coolant heater cord between the shock tower and side rail.
2. Raise and support the vehicle.




3. If equipped with the automatic transmission, install the coolant heater cord clips to the transmission range selector lever cable bracket.




4. If equipped with the manual transmission, Install the coolant heater cord clips to the transmission range selector lever cable bracket.




5. Connect the engine coolant heater cord to the engine coolant heater.
6. Lower the vehicle.