Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left tire and wheel.
3. Use a suitable transaxle support stand to support the rear of the powertrain.




4. Remove the transmission mount through bolt (1).




5. Remove the transmission mount to transmission bolts (1).
6. Remove the transmission mount (2) from the vehicle.

Installation Procedure




1. Install the transmission mount (2) to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the transmission mount to transmission bolts (1).

Tighten the bolts to 50 N.m (37 lb ft).




3. Install the transmission mount through bolt (1).

Tighten the bolt to 90 N.m (66 lb ft).

4. Remove the transaxle support stand.
5. Install the left tire and wheel.
6. Lower the vehicle.