Oil Pump Drive Replacement

Oil Pump Drive Replacement

Removal Procedure




1. Remove the air cleaner outlet duct.
2. Remove the intake manifold cover.
3. Remove the oil pump drive bolt.
4. Remove the oil pump drive clamp.
5. Remove the oil pump drive.
6. Remove the oil pump drive seal.

Installation Procedure




1. Install the oil pump drive seal. Coat the seal or bore in the engine block with engine oil.
2. Coat the drive gear on the oil pump drive with prelube. Refer to Sealers, Adhesives, and Lubricants for the correct part number.
3. Install the oil pump drive.
4. Install the oil pump drive clamp.

Notice: Refer to Fastener Notice .

5. Install the oil pump drive bolt.

Tighten the bolt to 36 N.m (27 lb ft).

6. Install the intake manifold cover.
7. Install the air cleaner outlet duct.