Exhaust Heat Shield Replacement

Exhaust Heat Shield Replacement

Removal Procedure




1. If equipped with a 3.5L, 3.6L, or 3.9L engine, remove the catalytic converters. Refer to Catalytic Converter Replacement - Left Side (LZ4) Catalytic Converter Replacement - Left Side (LZ9) Catalytic Converter Replacement - Left Side (LY7) and Catalytic Converter Replacement - Right Side (LZ4) Catalytic Converter Replacement - Right Side (LZ9 w/RPO MT2) Catalytic Converter Replacement - Right Side (LZ9 w/RPO M15) Catalytic Converter Replacement - Right Side (LY7) .
2. If equipped with a 2.4L engine remove the exhaust manifold pipe. Refer to Exhaust Manifold Pipe Replacement (LE5) .
3. Remove the heat shield nuts.
4. Remove the heat shield.

Installation Procedure




1. Position the heat shield to the underbody and the dash panel.

Notice: Refer to Fastener Notice .

2. Install the heat shield nuts.

Tighten the nuts to 10 N.m (89 lb in).

3. If equipped with a 2.4L engine, install the exhaust manifold pipe. Refer to Exhaust Manifold Pipe Replacement (LE5) .
4. If equipped with a 3.5L, 3.6L, or 3.9L engine, install the catalytic converters. Refer to Catalytic Converter Replacement - Left Side (LZ4) Catalytic Converter Replacement - Left Side (LZ9) Catalytic Converter Replacement - Left Side (LY7) and Catalytic Converter Replacement - Right Side (LZ4) Catalytic Converter Replacement - Right Side (LZ9 w/RPO MT2) Catalytic Converter Replacement - Right Side (LZ9 w/RPO M15) Catalytic Converter Replacement - Right Side (LY7) .