Exhaust Manifold Heat Shield Replacement - Right Side

Exhaust Manifold Heat Shield Replacement - Right Side (LZ4)

Removal Procedure

Caution: Refer to Exhaust Service Caution .

Caution: Refer to Protective Goggles and Glove Caution .




1. Remove the bank 1 sensor 1 heated oxygen sensor (HO2S).
2. Remove the exhaust manifold heat shield bolts.
3. Remove the exhaust manifold heat shield.

Installation Procedure




1. Install the exhaust manifold heat shield.

Notice: Refer to Fastener Notice .

2. Install the exhaust manifold heat shield bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the bank 1 sensor 1 HO2S.