Sunroof Actuator Cover Replacement - 2-3-4

SUNROOF ACTUATOR COVER REPLACEMENT - 2-3-4

REMOVAL PROCEDURE

1. IMPORTANT: If the actuator cover is damaged, the cover can be removed and a new one installed without removing the window panels. Using a flat blade tool, disengage the lower portion of the clip and pull the cover off the window panel frame. If removing and installing the cover, follow the procedures below.




Open the sunshade to the full rearward position.
2. Remove the 2nd or 3rd sunroof window.
3. Remove the rear sunroof window.
4. Remove the sunroof window side actuator covers (1) from the left and right sides.

INSTALLATION PROCEDURE




1. Install the rear sunroof window.
2. Install the 2nd or 3rd sunroof window.
3. Install the sunroof actuator cover (1) to the left and right sides, by aligning the cover with the holes in the window frame and press in place.
4. Close the sunshade.
5. Cycle the sunroof window to ensure proper operation and fit.