Seat Adjuster Motor Replacement - Vertical

SEAT ADJUSTER MOTOR REPLACEMENT - VERTICAL

REMOVAL PROCEDURE

1. CAUTION: Refer to SIR Caution.

Place the seat in the full up position to relieve tension on the motor.

2. Remove the front seat.




3. Disconnect the electrical connectors.




4. Remove the seat motor fastener.




5. Remove the seat motor roll pin.




6. Remove the seat motor.

INSTALLATION PROCEDURE




1. Install the seat motor.




2. Install the seat motor roll pin.

3. NOTE: Refer to Fastener Notice.




Install the seat motor fastener.

Tighten the fastener to 7 N.m (62 lb in).




4. Connect the electrical connectors.
5. Install the front seat.
6. Verify that the seat operates correctly.