Cylinder Head Replacement - Right
Cylinder Head Replacement - Right Side
Removal Procedure
1. Remove the engine.
2. Remove the right bank secondary timing chain.
3. Remove the cylinder head with the exhaust manifold.
4. Remove and discard the cylinder head gasket.
5. Clean and inspect the cylinder head and the engine block sealing surfaces. Refer to Cylinder Head Cleaning and Inspection and Engine Block Cleaning and Inspection .
6. If necessary, perform the following steps:
* Remove the exhaust manifold from the cylinder head.
* Remove the camshaft.
* Disassemble the cylinder head. Refer to Cylinder Head Disassemble .
Installation Procedure
1. If necessary, perform the following steps:
* Assemble the cylinder head. Refer to Cylinder Head Assemble .
* Install the camshaft.
* Install the exhaust manifold to the cylinder head.
2. Install a NEW cylinder head gasket.
3. Carefully install the cylinder head with the exhaust manifold to the engine. Refer to Cylinder Head Installation - Right Side .
4. Install the right bank secondary timing chain.
5. Install the engine.