Rear Suspension

Stabilizer Shaft Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Scribe a line on the rear camber adjust bolts (both left and right).
3. Remove the toe link.




4. Remove the stabilizer shaft bracket bolts.
5. Remove the stabilizer shaft insulators from the stabilizer shaft.




6. Remove the stabilizer link to knuckle bolts.
7. Remove the stabilizer shaft.

Installation Procedure

1. Install the stabilizer shaft.




2. Install the stabilizer shaft insulators.
3. Install the stabilizer shaft brackets.

Notice: Refer to Fastener Notice.

4. Install the stabilizer shaft bracket bolts.

Tighten the stabilizer shaft insulator bracket retaining bolts to 35 N.m (26 lb ft).




5. Install the stabilizer shaft links to knuckle bolts.

Tighten the bolts to 55 N.m (41 lb ft).

6. Install the toe link.
7. Lower the vehicle.