Hood Hinge: Service and Repair

Hood Hinge Replacement

Removal Procedure






Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Remove the hood.
2. Using a grease pencil, mark the position of the hood hinge to the body.
3. Remove the upper fender bolts.
4. Remove the hinge bolts and the hinge.

Installation Procedure




1. Position the hood hinge to the alignment marks on the vehicle.

Notice: Refer to Fastener Notice.

2. Install the hood hinge to body bolts.

Tighten the hood hinge to body bolts to 10 N.m (89 lb in).

3. Install the hood.
4. Install the upper fender bolts.

Tighten the hood hinge to body bolts to 10 N.m (89 lb in).

5. Close the hood.