Engine Mount Replacement (Convertible)

Engine Mount Replacement (Convertible)

Removal Procedure




1. Remove the air cleaner assembly.
2. Place a block of wood on a adjustable floor jack, and place the jack under the oil pan in order to support the engine.
3. Remove the engine mount to engine mount bracket nuts.




4. Remove the engine mount bolts.
5. Remove the engine mount.

Installation Procedure




1. Place the engine mount into position on the engine compartment side rail.

Notice: Refer to Fastener Notice .

2. Install the engine mount bolts.

Tighten the bolts to 50 N.m (37 lb ft).




3. Install the engine mount to engine mount bracket nuts.

Tighten the nuts to 50 N.m (37 lb ft).

4. Remove the floor jack and block of wood from under the oil pan.
5. Install the air cleaner assembly.