Air Cleaner Outlet Duct Replacement
Air Cleaner Outlet Duct Replacement
Removal Procedure
1. Remove the positive crankcase ventilation (PCV) fresh air tube from the air cleaner outlet duct.
2. Loosen the air cleaner outlet duct clamps at the mass air flow (MAF)/intake air temperature (IAT) sensor and throttle body.
3. Remove the air cleaner outlet duct bolt (1).
4. Remove the air cleaner outlet duct.
Installation Procedure
1. Install the air cleaner outlet duct.
Notice: Refer to Fastener Notice.
2. Install the air cleaner outlet duct bolt (1).
Tighten the bolt to 10 N.m (89 lb in).
3. Tighten the air cleaner outlet duct clamps at the MAF/IAT sensor and throttle body.
Tighten the clamps to 2 N.m (18 lb in).
4. Install the PCV fresh air tube to the air cleaner intake duct.