Variable Valve Timing Actuator: Service and Repair

Camshaft Position Actuator Magnet Replacement

Removal Procedure




1. Remove the intake manifold cover.
2. Remove the air cleaner assembly.
3. Remove the engine mount strut bracket.
4. Remove the engine mount bracket, if equipped with a convertible top.
5. Disconnect the camshaft position actuator magnet electrical connector.




6. Remove the camshaft position actuator magnet bolts.
7. Remove the camshaft position actuator magnet and O-ring seal.

Installation Procedure




1. Install the camshaft position actuator magnet O-ring seal and magnet.

Notice: Refer to Fastener Notice .

2. Install the camshaft position actuator magnet bolts.

Tighten the bolts to 10 N.m (89 lb in).




3. Connect the camshaft position actuator magnet electrical connector.
4. Install the engine mount bracket, if equipped with a convertible top.
5. Install the engine mount strut bracket.
6. Install the air cleaner assembly.
7. Install the intake manifold cover.