Rear Compartment Lid Inner Panel Trim Replacement

Rear Compartment Lid Inner Panel Trim Replacement

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

1. Open the rear compartment lid.




2. Use J 38778 to remove the push-in retainers from the trim panel on the rear compartment lid.
3. Unscrew the two cargo tie down retainers.
4. Remove the trim panel from the rear compartment lid.

Installation Procedure




1. Position the trim panel to the rear compartment lid.
2. Install the push-in retainers to the trim panel.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the two cargo tie down retainers.

Tighten the retainers to 4 N.m (35 lb in).

4. Close the rear compartment lid.