B3567
DTC B3567
DTC Descriptor
DTC B3567 59
- Driver Information Center Select Switch Circuit/Component Protection Time - Out
Diagnostic Fault Information
Important: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview
Circuit/System Description
The driver information center (DIC) monitors the DIC switch signals to determine the switch inputs. The switch inputs to the DIC is low when a switch is activated. Each switch state - GAGES, TRIP ODOMETER, SET/RESET, INFO, FUEL, OPTIONS - corresponds to a certain resistance value.
Conditions for Running the DTC
The ignition is in ACCESSORY or RUN.
Conditions for Setting the DTC
The DIC detects that the switch is stuck.
Action Taken When the DTC Sets
The DIC ignores the switch inputs.
Conditions for Clearing the DTC
* The DTC becomes history when the conditions for setting the DTC are no longer present.
* The history DTC clears after 40 malfunction-free warm-up cycles.
Circuit/System Testing
Verify that DTC B3567 is not set for the DIC.
If the DTC B3567 is set for the DIC, replace the DIC.
Repair Instructions
Important: Always perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests
Programming and RelearningProgramming and Relearning