Front Fog Lamp Replacement (GT)

FRONT FOG LAMP REPLACEMENT (GT)

REMOVAL PROCEDURE




1. Remove the front fog lamp screws (1) from the fog lamp.




2. Remove the fog lamp from the front bumper fascia.
3. Remove the fog lamp bulb/socket from the fog lamp, turning counterclockwise, if required.




4. Disconnect the electrical connector from the fog lamp bulb/socket.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the fog lamp bulb/socket.




2. Install the fog lamp bulb/socket to the fog lamp, turning clockwise, if required.
3. Position the fog lamp to the front bumper fascia.





4. NOTE: Refer to Fastener Notice in Service Precautions.

Install the front fog lamp screws to the fog lamp.

Tighten the screws to 2 N.m (18 lb in).
5. Check and adjust the front fog lamp aim as necessary. Refer to Fog Lamp Aiming (GT) Fog Lamp Aiming (GXP).