Front Bumper Fascia Energy Absorber Replacement

Front Bumper Fascia Energy Absorber Replacement

Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure





1.Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement Front Bumper Fascia Replacement .

2.Remove the plastic screws from the front energy absorber.





3.Remove the front bumper energy absorber from the front bumper fascia.

Installation Procedure





1.Position the front bumper energy absorber to the front bumper fascia.

Notice:Refer to Fastener Notice .

2.Install the front bumper energy absorber screws.

TightenTighten the screws to 2 N �m (18 lb in).

3.Install the front bumper fascia. Refer to Front Bumper Fascia Replacement Front Bumper Fascia Replacement .