Seat Back Replacement - Front

Seat Back Replacement - Front

Removal Procedure




1. Remove the front seat.
2. Remove the front seat trim panel.
3. Remove the seat cushion trim and pad.
4. Remove the 4 seat pan bolts.
5. Remove the seat pan.




6. Remove the bolts that secure the seat back frame to the adjuster.
7. If equipped, slide the lumbar electrical connector up to the seat back.
8. Remove the seat back from the front seat.

Installation Procedure




1. Place the seat back frame on the adjuster covers.
2. If equipped, slide the lumbar electrical connector back in place.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts that secure the seat back to the adjuster.

Tighten the bolts to 24 N.m (18 lb ft).




4. Install the seat pan.
5. Install the 4 bolts that secure the seat pan to the adjuster.

Tighten the bolts to 24 N.m (18 lb ft).




6. Install the seat pad and trim cover together.
7. Install the front seat trim panel.
8. Install the front seat.