ABS Indicator Always On
ABS Indicator Always On
Circuit Description
The instrument panel cluster (IPC) turns the antilock brake system (ABS) indicator ON during the IPC bulb check for approximately 3 seconds when the ignition switch is turned to the ON position. If the electronic brake control module (EBCM) DTC, the EBCM sends the IPC the command to turn the ABS indicator ON.
Test Description
The number below refers to step number on the diagnostic table.
2. This step checks if the IPC has the ability to turn the ABS indicator OFF, or if the EBCM is sending an incorrect command to turn the ABS indicator ON.
