License Lamp/Backup Lamp Bulb Replacement

LICENSE LAMP/BACKUP LAMP BULB REPLACEMENT

REMOVAL PROCEDURE




1. Open the rear compartment.
2. If replacing the licence lamp bulbs, preform the following steps:
- Remove the licence lamp bulb/sockets (2) by rotating the sockets counterclockwise.
- Pull the license lamp bulbs from the sockets.
3. If replacing the backup lamp bulbs, preform the following steps:
- Remove the backup lamp bulb/sockets (1) by rotating counterclockwise.
- Pull the backup lamp bulbs from the sockets.

INSTALLATION PROCEDURE




1. If the licence lamp bulbs were removed, preform the following steps:
- Press the license lamp bulbs into the sockets.
- Install the licence lamp bulb/sockets (2) by rotating the sockets clockwise.
2. If the backup lamp bulbs were removed, preform the following steps:
- Press the backup lamp bulbs (1) into the sockets.
- Install the backup lamp bulb/sockets by rotating clockwise.
3. Close the rear compartment.