Horn: Service and Repair
HORN REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Remove the RH headlamp assembly.
3. Disconnect the horn electrical connector.
4. Remove the horn bracket bolt.
5. Remove the horn from the front frame rail extension.
INSTALLATION PROCEDURE
1. Position the horn to the front frame rail extension; insert the horn anti-rotation tab into the slot on the frame rail extension.
2. NOTE: Refer to Fastener Notice in Service Precautions.
Install the horn bracket bolt.
Tighten the bolt to 15 N.m (11 lb ft).
3. Connect the horn electrical connector.
4. Install the RH headlamp assembly.
5. Close the hood.