Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Tools Required

J 41712 Oil Pressure Sensor Socket

Removal Procedure




1. If necessary, remove the engine sight shield.
2. Disconnect the oil pressure sensor electrical connector (4).




3. Using J 41712, remove the oil pressure sensor (706) and washer (707).

Installation Procedure




1. Apply sealant to the threads of the oil pressure sensor.

Notice: Refer to Fastener Notice in Service Precautions.

2. Using J 41712, install the oil pressure sensor (706) and washer (707).

Tighten the sensor to 35 N.m (26 lb ft).




3. Connect the oil pressure sensor electrical connector (4).
4. If necessary, install the engine sight shield.